RAM/ROM

Syntax

To create a memory in SpinalHDL, the Mem class should be used. It allows you to define a memory and add read and write ports to it.

The following table shows how to instantiate a memory:

Syntax	Description
Mem(type : Data,size : Int)	Create a RAM
Mem(type : Data,initialContent : Array[Data])	Create a ROM. If your target is an FPGA, because the memory can be inferred as a block ram, you can still create write ports on it.

Note

If you want to define a ROM, elements of the initialContent array should only be literal values (no operator, no resize functions). There is an example here.

Note

To give an initial content to a RAM, you can also use the init function.

The following table show how to add access ports on a memory :

Syntax	Description	Return
mem(address) := data	Synchronous write
mem(x)	Asynchronous read	T
mem.write( address data [enable] [mask] )	Synchronous write with an optional mask. If no enable is specified, it’s automatically inferred from the conditional scope where this function is called
mem.readAsync( address [readUnderWrite] )	Asynchronous read with an optional read under write policy	T
mem.readSync( address [enable] [readUnderWrite] [clockCrossing] )	Synchronous read with an optional enable, read under write policy and clockCrossing mode	T
mem.readWriteSync( address data enable write [mask] [readUnderWrite] [clockCrossing] )	Infer a read/write port. `data` is written when `enable && write`. Return the read data, the read occurs when `enable` is true	T

Note

If for some reason you need a specific memory port which is not implemented in Spinal, you can always abstract your memory by specifying a BlackBox for it.

Important

Memory ports in SpinalHDL are not inferred but explicitly defined. You should not use coding templates like in VHDL/Verilog to help the synthesis tool to infer memory.

Here is a example which infers a simple dual port ram (32 bits * 256):

val mem = Mem(Bits(32 bits),wordCount = 256)
mem.write(
  enable  = io.writeValid,
  address = io.writeAddress,
  data    = io.writeData
)

io.readData := mem.readSync(
  enable  = io.readValid,
  address = io.readAddress
)

Read under write policy

This policy specifies how a read is affected when a write occurs in the same cycle to the same address.

Kinds	Description
`dontCare`	Don’t care about the read value when the case occurs
`readFirst`	The read will get the old value (before the write)
`writeFirst`	The read will get the new value (provided by the write)

Important

The generated VHDL/Verilog is always in the ‘readFirst’ mode, which is compatible with ‘dontCare’ but not with ‘writeFirst’. To generate a design that contains this kind of feature, you need to enable the automatic memory blackboxing.

Mixed width ram

You can specify ports that access the memory with a width that is a power of two fraction of the memory width using these functions:

Syntax	Description
mem.writeMixedWidth( address data [readUnderWrite] )	Similar to mem.write
mem.readAsyncMixedWidth( address data [readUnderWrite] )	Similar to mem.readAsync, but in place to return the read value, it drive the data structure given as argument
mem.readSyncMixedWidth( address data [enable] [readUnderWrite] [clockCrossing] )	Similar to mem.readSync, but in place to return the read value, it drive the data structure given as argument
mem.readWriteSyncMixedWidth( address data enable write [mask] [readUnderWrite] [clockCrossing] )	Equivalent to mem.readWriteSync

Important

As for Read under write policy, to use this feature you need to enable the automatic memory blackboxing, because there is no universal VHDL/Verilog language template to infer mixed width ram.

Automatic blackboxing

Because it’s impossible to infer all ram kinds by using regular VHDL/Verilog, SpinalHDL integrates an optional automatic blackboxing system. This system looks at all memories present in your RTL netlist and replaces them with blackboxes. Then the generated code will rely on third party IP to provide the memory features, such as read during write policy and mixed width ports.

Here is an example of how to enable blackboxing of memories by default:

def main(args: Array[String]) {
  SpinalConfig()
    .addStandardMemBlackboxing(blackboxAll)
    .generateVhdl(new TopLevel)
}

If the standard blackboxing tools don’t do enough for your design, do not hesitate to create a git issue. There is also a way to create your own blackboxing tool.

Blackboxing policy

There are multiple policies that you can use to select which memory you want to blackbox and also what to do when the blackboxing is not feasible:

Kinds	Description
blackboxAll	Blackbox all memory. Throw an error on unblackboxable memory
blackboxAllWhatsYouCan	Blackbox all memory that is blackboxable
blackboxRequestedAndUninferable	Blackbox memory specified by the user and memory that is known to be uninferable (mixed width, …). Throw an error on unblackboxable memory
blackboxOnlyIfRequested	Blackbox memory specified by the user Throw an error on unblackboxable memory

To explicitly set a memory to be blackboxed, you can use its generateAsBlackBox function.

val mem = Mem(Rgb(rgbConfig),1 << 16)
mem.generateAsBlackBox()

You can also define your own blackboxing policy by extending the MemBlackboxingPolicy class.

Standard memory blackboxes

Here are the VHDL definitions of used blackboxes:

-- Simple asynchronous dual port (1 write port, 1 read port)
component Ram_1w_1ra is
  generic(
    wordCount : integer;
    wordWidth : integer;
    technology : string;
    readUnderWrite : string;
    wrAddressWidth : integer;
    wrDataWidth : integer;
    wrMaskWidth : integer;
    wrMaskEnable : boolean;
    rdAddressWidth : integer;
    rdDataWidth : integer
  );
  port(
    clk : in std_logic;
    wr_en : in std_logic;
    wr_mask : in std_logic_vector;
    wr_addr : in unsigned;
    wr_data : in std_logic_vector;
    rd_addr : in unsigned;
    rd_data : out std_logic_vector
  );
end component;

-- Simple synchronous dual port (1 write port, 1 read port)
component Ram_1w_1rs is
  generic(
    wordCount : integer;
    wordWidth : integer;
    clockCrossing : boolean;
    technology : string;
    readUnderWrite : string;
    wrAddressWidth : integer;
    wrDataWidth : integer;
    wrMaskWidth : integer;
    wrMaskEnable : boolean;
    rdAddressWidth : integer;
    rdDataWidth : integer;
    rdEnEnable : boolean
  );
  port(
    wr_clk : in std_logic;
    wr_en : in std_logic;
    wr_mask : in std_logic_vector;
    wr_addr : in unsigned;
    wr_data : in std_logic_vector;
    rd_clk : in std_logic;
    rd_en : in std_logic;
    rd_addr : in unsigned;
    rd_data : out std_logic_vector
  );
end component;

-- Single port (1 readWrite port)
component Ram_1wrs is
  generic(
    wordCount : integer;
    wordWidth : integer;
    readUnderWrite : string;
    technology : string
  );
  port(
    clk : in std_logic;
    en : in std_logic;
    wr : in std_logic;
    addr : in unsigned;
    wrData : in std_logic_vector;
    rdData : out std_logic_vector
  );
end component;

--True dual port (2 readWrite port)
component Ram_2wrs is
  generic(
    wordCount : integer;
    wordWidth : integer;
    clockCrossing : boolean;
    technology : string;
    portA_readUnderWrite : string;
    portA_addressWidth : integer;
    portA_dataWidth : integer;
    portA_maskWidth : integer;
    portA_maskEnable : boolean;
    portB_readUnderWrite : string;
    portB_addressWidth : integer;
    portB_dataWidth : integer;
    portB_maskWidth : integer;
    portB_maskEnable : boolean
  );
  port(
    portA_clk : in std_logic;
    portA_en : in std_logic;
    portA_wr : in std_logic;
    portA_mask : in std_logic_vector;
    portA_addr : in unsigned;
    portA_wrData : in std_logic_vector;
    portA_rdData : out std_logic_vector;
    portB_clk : in std_logic;
    portB_en : in std_logic;
    portB_wr : in std_logic;
    portB_mask : in std_logic_vector;
    portB_addr : in unsigned;
    portB_wrData : in std_logic_vector;
    portB_rdData : out std_logic_vector
  );
end component;

As you can see, blackboxes have a technology parameter. To set it you can use the setTechnology function on the corresponding memory. There are currently 4 kinds of technogy possible:

auto
ramBlock
distributedLut
registerFile